Radium Engineering OEM Fuel Rail Kit Evo 8/9

This option includes only the basic fuel rail as shown in the picture below. All fittings must be purchased separately. This option is perfect for installers building a custom fuel system.

20-0119-10 Fuel Rail Kit, EVO 8-9, OEM Configuration
This option includes everything required to replace the OEM fuel rail. It includes the exact items as shown below in the picture.
-1x Radium Engineering EVO 8-9 fuel rail.
-1x M14 inverted flare adapter is included to adapt the OEM hard line on the firewall to -6AN male.
-1x Pre-fabricated -6AN PTFE hose (6AN-16.0-ST-ST) hose is included to replace the OEM rubber hose and restrictive 2 bolt flange.
-1x -6AN adapter for connecting the the PTFE hose to the fuel rail inlet port.
-1x Custom machined adapter to reuse the OEM fuel pressure regulator.
-1x Aluminum -8AN O-ring plug for center port.

FUEL PRESSURE GAUGE
A fuel pressure gauge can be mounted in the center port, or on the inlet port using the appropriate adapter fitting as shown below. The pressure gauge and adapters can be found HERE.

FUEL PULSE DAMPER
Depending on the configuration, a fuel pulse damper can be used in one of the available ports. More information can be found HERE.