Forced Performance FP Red Journal Bearing Turbo Evo 8/9

EVO IX JB Red

• Compressor wheel - 76HTZ
• Flow rating - 61LB per minute
• CW Measurements - 54.8MM Inducer / 76MM Exducer
• TW Measurements - 67.3MM Inducer / 58.8MM Exducer
• Compressor Housing - 84MM Flow Advancement Port Cover
• Turbine Housing - FP Stainless EVO 9 Turbine Housing
• CHRA - FP Journal Bearing
• Oil Line - Not Included - Required for proper lubrication.

The Red is the pennacle of street and strip turbochargers. Small enough that it doesn't take forever to build up steam but large enough to make north of 525WHP.

Info on turbine housing coating.

The FP EVO Stainless Turbine Housing was designed for race applications where the turbocharger would be operating above 20psi. Attempting to operate below 20PSI can result in boost creep in some applications.

Info on turbine housing coating.

White paper regarding oil pick up issues and their impact on your turbocharger.

Oil requirements for EVO 9 JB turbochargers