Home > C8 Corvette 2020+ > Brake Systems > Brake Pads >

Power Stop Front Z23 Evolution Sport Carbon Fiber Brake Pads 2020-2021 C8 Corvette
Power Stop Front Z23 Evolution Sport Carbon Fiber Brake Pads 2020-2021 C8 Corvette


 
Alternative Views:


  • Orders over $100 ship free!
Our Price: $59.99



Product Code: Z23-8007
Qty:

Description
 
PowerStop Front Z23 Evolution Sport Carbon Fiber Brake Pads
2020-2021 C8 Corvette

Forget standard, off-the-shelf parts. The Z23 Evolution Sport brake pad and premium stainless steel hardware kit is the easy, bolt-on stopping power upgrade kit for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a dust-free formula to keep those wheels looking great while you say goodbye to nasty brake dust. The pads are also 3rd party tested in the USA to ensure quiet braking, allowing you to enjoy your drive. Give your daily-driver the easy performance upgrade it deserves with Z23 Evolution Sport.

Install YOURSELF

In the world of vehicle maintenance replacing your brakes is an easy job to tackle on your own. Our step-by-step installation guides will help you get the job done.


IN THE BOX

  • Z23 Carbon-Fiber Ceramic Brake Pads
  • Dual-Layer Rubberized Shims
  • Premium Stainless Steel Hardware
  • New Pin Bushing Kit
  • Hi-Temp Brake Lubricant
  • 3 Year / 36,000 miles warranty


HOW TO GUIDES


Break in your PowerStop Brakes as follows:

  • 1

    Complete 5 moderate to aggressive stops from 40 mph down to 10 mph in rapid succession without letting the brakes cool and do not come to a complete stop. If you're forced to stop, complete the stop and either shift the vehicle into park or give room in front so you can allow the vehicle to roll slightly while waiting for the track light. The rotors will be very hot and holding down the brake pedal will force the brake pad to contact the rotor and possibly create an imprint on the rotor. This imprint may contribute to the creation of brake judder.

  • 2

    Continue the break in by completing 5 moderate stops from 35 mph to 5 mph in rapid succession without letting the brakes cool. You should expect to smell some resin as the brakes get hot. After this is complete, continue to drive the vehicle for as long as possible without heating the brakes excessively and without coming to a complete stop (Try for about 5 minutes at moderate speed). This is the cooling stage.

  • 3

    Once this is completed and the brakes have cooled to standard operating temperature, you may use the brakes normally. Never cool your brakes with water, as this can damage them.


    Important
    Following proper break-in procedure for new brake pads/rotors using the pad bedding procedure as follows. Proper pad bedding can prevent rotor warping..


Share your knowledge of this product. Be the first to write a review »